Connect and Configure Async Replication

Everpure Cloud Dedicated for AWS
Audience
Public
Technology Integrations
Amazon Web Services (AWS)
Source Type
Documentation

1. Access Everpure Cloud Dedicated and get the connection key.

Note:

This step requires an established connection between the on-premises FlashArray and Everpure Cloud Dedicated in AWS. This can be achieved with various approaches, i.e AWS Site-to-Site VPN or AWS DirectConnect.

2. Access on-premises FlashArray and establish the connection with Everpure Cloud Dedicated by clicking on the plus icon, and fill the following:

  1. Management Address: This is the Everpure Cloud Dedicated floating IP address used to access the GUI.
  2. Type: Async Replication
  3. Connection Key: The key obtained in the previous step.
  4. Replication Address: The replication addresses are auto-discovered unless NAT is used. (In order to get the replication address use the Everpure Cloud Dedicated GUI and go to Settings > Network).

    3. Create a protection group for replication to Everpure Cloud Dedicated.

    4. Click on the created protection group and enable and edit the replication schedule.

    Note:

    For more detailed information on protection group replication interval and retention schedule. See FlashArray Asynchronous Replication Configuration and Best Practices Guide .

    5. Click on the shown ellipsis to add the target to the protection group. The target for this should be Everpure Cloud Dedicated connected in the previous steps.

    Step 2: