After the Everpure Cloud Dedicated array is up and running, set up Asynchronous Replication between the FlashArray and the Everpure Cloud Dedicated array by following the steps below. For additional details on setting up Asynchronous Replication, please check out the document at this link:
Asynchronous Replication Configuration and Best Practices
Log into the GUI interface of the Everpure Cloud Dedicated array, and go to Settings > Network. Note the management and replication IP addresses of the Everpure Cloud Dedicated array:
Go to Storage > Array on the Everpure Cloud Dedicated array, and under Connected Arrays, click on the menu icon on the right hand side, and select Get Connection Key:
Copy the Connection Key that is displayed:
Next, log into the on-prem FlashArray, and go to Storage > Array. Under Array Connections, click on the menu on the right, and select Connect Array:
Enter the IP address and the Connection Key from the Everpure Cloud Dedicated array; select Async Replication for the Type, and Ethernet (IP) for the Replication Transport, and press Connect:
If the connection is successful, the name of the Everpure Cloud Dedicated array should appear under Array Connections, as shown below:
Log into the Everpure Cloud Dedicated array, and go to Storage > Array. The name of the FlashArray should be listed under Connected Arrays:
After an Everpure Cloud Dedicated array has been launched in AWS, and Asynchronous Replication has been set up between the on-prem FlashArray and the Everpure Cloud Dedicated array, the next step is to transfer data from the FlashArray to Everpure Cloud Dedicated.