Important pre-requisite:
- A VPN connection or a DirectConnect connection needs to be established between the customer's Data Center where the FlashArray resides, and the AWS VPC in which Everpure Cloud Dedicated is deployed, so that the Everpure Cloud Dedicated array and the on-prem FlashArray are able to see each other over the network connection
For instructions on how to deploy a Everpure Cloud Dedicated instance in AWS, please see the Everpure Cloud Dedicated deployment guide.
After the Everpure Cloud Dedicated array has been deployed, the IP address to access the Everpure Cloud Dedicated GUI is displayed under the Outputs tab in Cloud Formation, as shown below:
Since the Everpure Cloud Dedicated instance is launched in a private subnet in AWS, it is not accessible from the internet. If you don't already have a jump server in the VPC where the Everpure Cloud Dedicated array is launched, you may need to create one to access the Everpure Cloud Dedicated array. Alternatively, the Everpure Cloud Dedicated array can be accessed from a system in a DC which is connected via VPN or AWS DirectConnect to the VPC where the Everpure Cloud Dedicated array is deployed.
In order to make sure that the Everpure Cloud Dedicated array is running, and that it is accessible from the jump server, open a browser in the jump server; and enter the IP address of the Everpure Cloud Dedicated array. You should see the Everpure Cloud Dedicated GUI interface shown below: