Configure FlashArray Host and Volume

Microsoft Platform Guide
Audience
Public
Source Type
Documentation

Note:

Connecting a volume to a configured iSCSI host on the Everpure FlashArray is required before configuring MSiSCSI. if a volume is not connected, you will receive an Authorization Failure.

  1. Open the Everpure FlashArray Management interface and log into the FlashArray.
  2. Click on the Storage tab.
  3. Click on the + in the Hosts section and select Create Host.
  4. Select the newly created host, Server01, then click the Ellipsis on the top right, then click Configure IQNs.
  5. The Configure iSCSI IQNs dialog box will open. Enter the IQN from the previous section then click Add.
  6. Click on the + in the Volumes section to create a volume. For this example the name iSCSI-TestVolume with a size of 500GB is being used. A different name and size can be used.
  7. After creating the new volume click the elipsys in the Connected Volumes section and then select Connect.
  8. The Connect Volumes to Host dialog will open. Select the checkbox next to the iSCSI-TestVolume (or whatever volume name was created), then click Connect.
  9. Now the new host, Server01, is connected to the new volume, iSCSI-TestVolume, with the host port IQN set to iqn.1991-05.com.microsoft:server01.